Dear Sergi Abadal,
I am highly interested in a PhD position at N3Cat.
I found an open PhD position in Multiscale Wireless Communication at N3Cat and I would like to present my candidature and interest for this position. It perfectly matches my research interest.
Attached to this email you can find my curriculum and transcript of records of my Master and Bachelor degree.
Looking forward to your reply.
Best Regards,
Oltjon Kodheli
To whom it may concern,
I read your paper "Time-Domain Analysis of Graphene-based Miniaturized
Antennas for Ultra-short-range Impulse Radio Communications" and found it
very intriguing. I liked the idea of complete time domain analysis for
different career mobility and chemical potential of graphene based
antenna.I also read "Graphene-Enabled Wireless Communication for Massive
Multicore Architectures".I liked the fact how the paper discusses
explicitly how graphene antenna can be used in WNoC in terahertz band where
antenna size is stringent specially in multicore processors. Fascinating by
this researches, I found your website which suggests that you are
recruiting graduate students in your lab.
I would like to introduce myself as a student of Department of Applied
Physics, Electronics and Communication Engineering; University of
Chittagong; Bangladesh. I have completed my B.Sc. in Engineering degree in
December 2016 with a CGPA of 3.64 out of 4.0. I have also secured an IELTS
score of 7.5 out of 9.0. I would like to apply for Masters with an aim at
getting a PhD down the road in Universitat Politècnica de Catalunya.
I have completed courses that are related to Communications such as Signals
and Systems, Telecommunication and Switching,Microwave Engineering,
Computer Networking, Wireless Communication, Communication Theory, Optical
Fiber Communications etc. These courses were designed in such way that it
shaped my basic knowledge of Communication Engineering. I am also skilled
in MATLAB Communication Toolbox. I am currently working on a project of
developing hybrid plasmonic antenna based on graphene on simulation.
I would like to know about the research opportunities working with you. I
would be very grateful if I get the chance to work and learn more
interesting stuffs on graphene based wireless communication. I have
attached my academic CV, Transcript and Cover Letter for further
information.
Regards,
Sakibul Azam
Dept. of Applied Physics, Electronics and Communication Engineering
University of Chittagong
Bangladesh
ᐧ
Dear
Dr. Sergi Abadal,
At present, I am working as a project engineer at Signal Processing in
Networks (SPiN) group, Department of Electrical Engineering at Indian
Institute of Technology, Kanpur (IITK) in another facet of communication
systems which is Advanced Communication Techniques and Control for the
Prevention of Blackouts (Nov. 2015 to Present). I have recently completed
my masters in Communication System Design from Indian Institute of
Information Technology Design and Manufacturing (IIITD&M) Kancheepuram with
CGPA 7.57/10. I did my Bachelors in Electronics and Telecommunication
Engineering from Vidya Pratishthans College of Engineering Baramati
(affiliated to University of Pune, India) with First Class.
I'm an enthusiastic, hardworking, adaptable and highly motivated
individual, who enjoys taking on new challenges and opportunities. Apart
from my regular coursework, I studied several courses (mainly by using
online resources EdX, Coursera, MITs OpenCourseWare, and NPTEL).
I am looking for a Ph.D. position in the areas related to wireless
communication and networking.
Please find my curriculum vitae and academic transcripts attached below to
highlight my academic skills. If you require any additional materials or
information, I am happy to supply it.
Thanking you,
Kind regards,
*Shinde Swapnil S.*
Dear Sir/Madam,
I am Premkumara, student at UPC barcelona i am doing my Masters in
Aerospace Science and Technology. I am looking for a 3 to 6 month
internship on on fields related to nanotechnology, to enhance my knowledge
in this field.
My previous work on composite materials was to produce a surface (patch)
antenna for cubesat made out of graphene using direct laser sintering (DLS)
method, in this project our primary research was to produce a composite
mixture of Graphene and PA11. To make it suitable for 3D printing using DLS
method.
I am very interested to work with your organization on fields related to
nanoengineering. For a period of 3 to 6 months from March 2017 to July
2017. I have attached my resume, cover letter and my previous academic
transcript. Please find it attached.
Thank you
*--*
*Kind Regards,*
*Premkumara Viswanathan*
*EETAC - University Polytechnic of Catalunya (Campus del Baxi Llobregat)*
*Calle Esteve Terradas, 7, 08860 castelldefels, Barcelona, Spain*
*Email - premthesleuth(a)gmail.com <premthesleuth(a)gmail.com>*
*Phone - +34 631169295*
Goodafternoon Madame/Sir!
I am a graduated student from University of Camerino (Italy) in CHEMISTRY
AND ADVANCED CHEMICAL METHOLOGIES with deep knowledge on inorganic
chemistry,physical chemistry, nanomaterials and electrochemistry, working
for over one year in graphene and graphene oxide project: "Synthesis and
characterization of modified graphite by coinage metal nanoparticles and
coordination compounds."
It would be an honor being part of your estimated company.
Kindly, Albenc!
Dear Professors,
I am very sorry to bother you and send this E-mail, but I really wish to contact you. I am a graduate student majoring in Computer System Architecture in school of computer science, Shaanxi Normal University (Xi’an, China). I wish to pursue a doctoral degree of “nano-scale communication” at N3Cat. My desired date of entrance is Fall, 2016. I am writing this letter to you to introduce myself and query about the Phd programs at N3Cat. Thank you very much for reading this email.
I wish to say that I am really want to study at N3Cat, and I eagerly wish that I can join your research group. My basic information is in the attachment.
Would you please consider my application and tell me whether it is possible for me to be enrolled? Thank you very much for your kind assistance. I am looking forward to receiving your reply.
Yours Sincerely
Pengfei Lu
Dear Sir/Madam,
I am a master's student of Shaanxi Normal University(China), I want to know whether there is still a
position for nanonetwork? The attachment is my resume.
Best Regards,
Pengfei Lu
Dear sir/madam,
I am writing to enquire about the availability of a research scientist
position in your laboratory. I am currently a project engineer & a post
doctoral researcher in the National Nanotechnology Institute at Bilkent
University in Ankara, Turkey, specializing in synthesis of nanomaterials,
the associated fabrication of nanoscale devices, as well as the materials
characterization and device performance analysis.
During my post-doctoral time (under the supervision of *Dr. Ali Kemal
Okyay **(Stanford electrical engineering alumni)* from *the Electrical
Engineering Department at Bilkent University*, I pioneered work on the
synthesis, stability and the use of semiconductor nanoparticles (e.g. Si,
MoS2, II-VI, and III-V alloys) in thin film device applications such as
thin film photodetectors and thin film memory cells. We demonstrated that *2-50
nm* size semiconductor nanoparticles exhibit stability towards harsh &
humid environments. These nanoparticles have been obtained in large
quantities through laser ablation, with optical properties of these
nanoparticles tailored by post-processing methods. As part of my research,
I have fabricated silicon, molybdenate nanoparticle based photodiodes that
operate well in UV/VIS range, which are of critical importance for next
generation of photodetector and photovoltaic chips.
A prof-of-concept NIR range photodiode has been fabricated based on laser
synthesized *3-36 nm* indium nitride nanoparticles in collaboration with *Dr.
Dietz **(Georgia State University Physics Department* in order to replace
expensive InGaAs based camera chips with inexpensive ones, aiming for
efficient and low-cost NIR imaging systems.
In addition to photodiode applications, 2 nm silicon, 16 nm indium nitride
nanoparticle and graphene nanoplalelet based memory chips have been
fabricated in collaboration with *Dr. Nayfeh* *(Masdar Institute,
Microsystems engineering).*We demonstrated that those semiconductor
nanoparticles behave as effective charge storage centers for next
generation miniaturized computer memory chips.
During my work at Bilkent University, I have published a comprehensive
study on a UV/VIS range photodiode based on atomic layer deposition (ALD)
grown ZnO thin films at various growth temperatures. In this comprehensive
study, the photodiode responsivity characteristics and as well as
electrical resistivity characteristics of ZnO thin films have been
detailed. This work is pioneering with regard of the use of an ALD grown
wide-bandgap semiconductor thin film in photodiode applications, which may
lead towards next generation of UV sensor chips and environmental
detectors. Further research results showed that semiconductor
nanoparticles and graphene nanoplatelets are effective components to shape
next generation electronics and photodetector applications. Collaborative
work has been done with *Dr. Brongersma* (*Stanford Materials Science*)
regarding the fabrication of Si/Ge multi- qauntum well (MQW) photodetector,
as a competition to current Silicon photodetectors for space applications (*J.
Crystal growth 2015*). I used effective focused ion beam (FIB) analysis on
the Si/Ge MQW structure to determine defect composition for effective
high-tech applications to rival current InGaAs and HgCdTe photodetectors
for next generation telescope and IR bolometer applications that would
provide lower cost and more effective imaging of nearby galaxies.
The results of my post-doctoral research have beeb published in various
prestigious journals such as *Journal of Physical Chemistry C, Optics
Express, Materials Chemistry & Physics, Journal of Optics, Nature Photonics
(highlights), Physica status solidi C, Physica status solidi A, Applied
Physics Letters, and IEEE electron device letters.*
I completed my PhD dissertational work under the guidance of *Dr. Jeff
Krause* (*University of Florida, now program officer at Department of
Energy, Optical Sciences Division*) on computer simulations of silver
nanoparticles and self assembled organic monolayers that may are of
critical importance for biosensing applications. The study of azobenzene
molecule as a molecular switch has been performed in computational
environment using computational codes such as VASP and DLPOLY. Results of
my dissertational work have been published in *Journal of physical
chemistry C, and Physical Review B*. My graduate research work focused on
providing new insight on understanding nanoparticle diffusions on complex
surfaces and temperature dependent behaviour of self-assembled organic
monolayers and molecular switches that are of critical importance for next
generation molecular electronics & molecular computer applications.
During my graduate years, I had the the opportunity to teach undergraduate
chemistry labs and as well as a graduate level course on computer modelling
and simulations in nanotechnology that prepared me well for a fascinating
teaching position.
I strongly believe that my strong background in materials science, physical
chemistry, nanotechnology and my diverse research experience that lead
through cutting edge discoveries would makes me a great addition to your
prestigious department and to your research environment.
I’m looking forward to hearing from you about the opportunities to
contribute to your research program.
Sincerely yours,
Dr. Sabri Alkis.
Hi,
I am applying for the PhD position in your research center. I have
completed master degree in communication engineering from Tampere
University of Technology. My thesis is in the field of nano communication.
I have attached my CV here with.
Look forward to hear from you.
Sincerly,
semanta raj neupane
Hello,I hope this message finds you well. Let me start by introducing myself. My name is Ibrahim Tariq Javed and I am a lecturer at Bahria University, Islamabad, Pakistan, in the Department of Electrical Engineering.My qualifications include a Research Based MS in Electrical Engineering from LUMS University, Lahore, Pakistan. Before my MS, I did my Bachelors in Telecommunication from National University of Computer and Emerging Sciences (NUCES-FAST) and successfully graduated in the year 2010.
My MS research thesis was titled ‘Communication in Terahertz for Wireless Nano sensor Networks (WNSN)’. My research paper titled ‘Frequency Band Selection and Channel Modelling for WNSN Applications using SimpleNano’ published in IEEE ICC 2013 has been attached.I have successfully supervised final year project in the year 2013-14 titled as "Terahertz channel Modelling using Graphene Nano Antennas" which was selected as the Best project in my university among 38 other projects. I am currently supervising two projects in the area of Nano networks 1) Performance evaluation of WNSN in presence of Multipaths 2) Implementation of MIMO for Massive Multicore ArchitecturesI previously contacted your research group but could not stay in touch due to heavy workload at my university.I am interested in working in the area of nano networks. I hope you consider this email as an application to the PhD position at your research group when ever an opening is available . I have attached my latest resume for your consideration.
RegardsIbrahim
